自定內容
網站標志
自定內容
自定內容
導航菜單
自定內容
自定內容
Ningbo Lewei Machinery Co., Ltd.
--Contact us-- 
Tel: +86-574-65781718
Tel: +86-574-65726729 
Mobile phone: +86-18967846336
Fax: +86-574-65781718
E-mail: chinalewei@aliyun.com
WeChat: +86-18967846336
QQ: Le Wei: 674696946
QQ: Mai Weibao: 3411276006
Url: www.ciccoal.com

Ningbo Lewei website QR code



Ningbo Lewei Taobao shop QR code




A、Yellow wine, white sprinkling, medicinal liquor and other wine rushing bottle filling and capping

Three、Glass bottle: case of complete sets of equipment such as rice wine, white wine, medicinal wine, wine, beverage, etc.

               

1、Filling (flushing, liquefying, filling, sealing) unit complete sets of equipment engineering case


2、Overview
2-1、This machine is suitable for all kinds of glass bottles, plastic bottles, etc. before filling, rinsing, bottling, filling, sealing (capping), and then entering the conveyor, to the next production process (see the following process flow).


3、Principle and structure
3-1、The new bottle (the old bottle process is determined) enters the bottle conveying line and enters into the bottle washing machine. After the bottle is divided into bottles by the bottle separator, the bottle smoothly enters the bottle wheel and is transferred to the bottle holder position by the bottle wheel. The clamps of each station on the rotating platform clamp the bottle neck in turn, and the bottles are turned 180 degrees one by one. After the bottle is inverted, the water is sprayed. The bottles enter the tap water station in turn, rinse 6 stations, and enter the 4 stations. The first drain zone, then enter the pure water station, rinse 6 stations, enter the inclined drain bottle area, drain the residual water in the bottle, then turn the pliers to make the bottle turn 180 degrees again, the bottle turns to the out When the position of the bottle is released, the handle is released, and the bottle puller sends the bottle conveyor to the filling and sealing machine, and then enters the conveyor to the next process.

4、Characteristics
4-1、 Fully take into account the requirements of hygiene;
4-2、 Filling cylinders, filling valves and all single-machine and material contact parts are made of 304, which not only has good corrosion resistance, but also is easy to clean.
4-3、 The work surface is covered with stainless steel 304 and tightly sealed to protect the drive inside the base and facilitate the cleaning of the countertop to keep it clean.
4-4、This machine adopts a divided water chamber, double medium channel water supply, and two water sources are independently washed to ensure clean bottles.
4-5、The flushing system uses a total of two flushes: the first flush with tap water, the second flush with pure water, and the rear area is the drain zone. Ensure the quality of bottle rinsing before filling and meet food hygiene standards.
4-6、The flushing nozzle adopts a non-contact nozzle, and the solid cone nozzle can wash the bottom of the bottle, the bottle body and the two corners of the bottle, and avoid contamination caused by contact with the bottle mouth.      
4-7、The working position of the bottle holder is 16mm from the flat surface of the bottle mouth to avoid contact between the bottle holder and the threaded mouth of the bottle to prevent bottle mouth contamination. All parts in contact with the liquid are made of high quality stainless steel to ensure that the bottle being washed is not contaminated and meets food hygiene standards. .
4-8、The inclined clean drain table is used to facilitate drainage and keep the table surface clean; the platform is equipped with a water tank around the sump, the sump is inside the protection door, and the bottom of the water tank is equipped with a water pipe with a strainer.。                    
4-9、Automatic protection, with overload clutch protection device at the inlet and outlet dials, when the bottle is in the bottle, it will automatically stop the alarm to ensure the safety in production.                   
4-10、The operation is stable, stable and reliable, and the transmission components are placed in the body and the structure is compact.
4-11、All parts in contact with liquids are made of 304 stainless steel to ensure that the production process is not contaminated and meets food hygiene standards.

5、  Product parameters
5-2、 Name: Yellow wine, white wine, medicinal liquor, beverage
5-3、 Production: 5-10 bottles / minute
5-4、 Bottle quality: glass (old) new bottle
5-5、 Capacity: 500-600ml / bottle
5-6、 Cover type: standard screw cap or gland  
5-7、 Bottle diameter(mm)Φ60-Φ80  
5-8、 Bottle height(mm)160-220
5-9、 Bottle mouth outer diameter(mm)Φ20-Φ30    
5-10、 Bottle mouth outer diameter...
5-11、Carton big packaging: 12-24 bottles / box   
5-12、Empty bottle packaging: bottle or plastic box

6、Process flow
6-1、Empty bottle with white wine---Roller-feeding machine---Unloading machine (injecting machine---unloading machine)--- Bottle conveying machine---empty bottle inspection device---? ? ? ? ----Water Bottle Washing Machine---????---Draining Machine---Filling and Sealing Machine----Water Bottle Spraying Machine---One? ? ? ? --- 2 wine testing devices --- bottle storage bottle machine ---????----air knife dryer---transfer bottle printer---? ? ? ? ---Marking device ---? ? ? ? --- Bottle storage bottle machine --- bottle machine --- carton packing machine --- box machine --- tape sealing machine --- inkjet printer --- carton box machine -- -Carton palletizing machine---Rolling machine---Dumping machine---Product storage;

7、Process flow
7-1、Carton Unpacking Machine---Insert Box---Entering Carton Packing Machine

8、provide information
8-1、After the user determines the above 5th, 6th, and 7th, the company can provide the project information such as the total price budget design, equipment process design, CAD equipment floor plan design and equipment technical parameter design.

9、Description
9-1、If the user adopts non-standard new glass bottles (old bottles), plastic bottles, packaging containers, and the above technical procedures, the technical parameters of the complete equipment need to be determined.
9-2、This information is a preliminary plan. If there are changes in the details of the project or changes after the technical exchange, the modification of the technical and commercial contracts shall prevail.

10、Punching and washing machine


11、Leaching machine


12、 Filling and sealing (capping) machine


13、Assembly workshop


14、Labeling (sticker) machine


15、Packing (paper, plastic) machine


16、Carton unpacking machine


17、Tape carton sealing machine


18、Turning roller conveyor


19、Printer


20、Double S curved high speed bottle conveyor


21、Natural telescopic turning conveyor


22、Carton turning conveyor counting machine


23、Carton packaging beverages finished after palletizing


24、Finished carton packaging


25、Suction cup semi-automatic palletizer


B、Automatic carton unpacking machine
New product
導航菜單
Technology products
導航菜單
Copyright Ningbo Lewei Machinery Co., Ltd. Technical support:浙江七米
Tel:+86-574-65781718 +86-574-65726729    Fax:+86-574-65781718
The pictures and texts of this publication may not be reproduced without permission. All equipment, technology and materials are subject to change without prior notice.

小草社区视频在线_小草社区视频在线观看播放_小草在线观看视频播放免费